U2 Fasteners

The Universal Screw™ is ideal for replacing those old deck screws. The features of the Universal Screw™ work together to drive and secure this screw in many types of materials that are used in residential construction. 
 
FEATURES:

• Tapper Point, consisting of the Cork Screw Start and Blade Cutting Thread for easy piercing and alleviating strain on the material.  

• Tight Star Recess system grasps the U-Bit tightly and can be installed with one hand.  

• Underneath the Universal head Burrow Pockets are dynamically engineered to help countersink into the toughest of materials. 

• Below the smooth shank is the Reamer Thread, which enlarges the hole to create a passage when drawing materials together and reduces tension for the screw head.

The Construction Screw™, also known as CS Screw, is the next generation of construction screws that are replacing lag screws. 

FEATURES: 

• Dome Head enhances the structural capability.  

• Tapper Point which consists of the Cork Screw Start and Blade Cutting Thread for easy piercing and alleviating strain on the material.

• Tight Star Recess system grasps the U-Bit tightly and can be installed with one hand.  

• Talon Grip holds the screw tight to prevent loosening and uses its nibs to dig into the material when countersunk. 

• Reamer Thread enlarges the hole in the material to create a larger passage when drawing materials together and reduces tension on the screw head.

The Fine Screw™ is designed especially for carpenters who do fine professional work. When building the most delicate of projects, contractors prefer U2 Fasteners™ Fine Screw™ for its modest head size.  

 FEATURES:  

• With its slim shank and bulging thread this screw can be used without damaging even the hardest wood.

• Tapper Point which consists of the Cork Screw Start and Blade Cutting Thread for easy piercing and alleviating strain on the material.

• Tight Star Recess system grasps the U-Bit tightly and can be installed with one hand.

The Re-Fine Screw™ is designed especially for carpenters who do fine professional work. When building the most delicate of projects, contractors prefer U2 Fasteners™ Re-Fine Screw™ for its modest head size.  

 FEATURES:  

• With its slim shank and bulging thread this screw can be used without damaging even the hardest wood.

• Tapper Point which consists of the Cork Screw Start and Blade Cutting Thread for easy piercing and alleviating strain on the material.

• Tight Star Recess system grasps the U-Bit tightly and can be installed with one hand.

• RE-FINE Thread depresses fibrous surface materials for a clean finished appearance.

The Cap Screw™ is an ideal light duty interior and exterior screw. This screw makes all your small projects easier with the drawdown strength of the head and the clean finish. 

FEATURES:  

• Dome Head with rim and Cutting Ribbon underhead.

• Tapper Point which consists of the Cork Screw Start and Blade Cutting Thread for easy piercing and alleviating strain on the material.

• Tight Star Recess system grasps the U-Bit tightly and can be installed with one hand.

The adjustable screw replaces shimming and can make door hanging a one person job.

Easy 4 Step Wood to Wood Installation

1. Predrill window frame/ door jamb (only) with 5/16" drill bit.

2. Engage crown bit into TopStar™ screw head and drive flush to surface of frame or jamb. 

3. For adjustments remove crown from bit.

4. Engage bit into center hole of TopStar™ screw head and adjust to your requirements.

The Steel Siding Screw™ is an ideal interior and exterior screw. This screw makes all your projects easier with the drawdown strength of the head and the clean finish. 

FEATURES:  

• Dome Head, Powder coated WHITE with rim and grey EPDM rubber washer.

• Tapper Point which consists of the Cork Screw Start and Blade Cutting Thread for easy piercing and alleviating strain on the material.

• Tight Star Recess system grasps the U-Bit tightly.

The U-Bits™ are specifically designed to fit snug and firm on the Tight Star Recess of the U2 fasteners™ screw assortment. However, U2 fasteners™ also fit the traditional star drive. U-Bits™ are impact driver ready and are made of hardened steel to prevent wear and tear.